JET J-3410 7-Inch by 12-Inch 3/4-Horsepower 115-Volt Single Phase Horizontal Wet Bandsaw

JET J-3410 7-Inch by 12-Inch 3/4-Horsepower 115-Volt Single Phase Horizontal Wet Bandsaw Review

JET J-3410 7-Inch by 12-Inch 3/4-Horsepower 115-Volt Single Phase Horizontal Wet Bandsaw Feature

• Side blade guides eccentric shaft, ball bearing
• Rear blade guides ball bearings
• Blade drive is steel, heat treated worm, driving a bronze worm gear in oil bath
• Heavy-duty cast iron saw head and table
• Adjustable ball bearing blade guides

The Jet J-3410 7-inch by 12-inch horizontal wet band saw is fully equipped with a 3/4-horsepower motor, side and rear blade guides, heavy-duty cast-iron saw head and table, and rapid acting vise. The included 3/4-inch bi-metal blade comes to a stop after each cut with the automatic shut-off feature, and it's backed by a two-year limited warranty.

Wheeled base for easy portability around your shop (view larger).

414454 J-3410 Wet Band Saw At a Glance: Heat-treated steel worm pinion driving a bronze worm ring gear in an oil bath Heavy-duty cast iron saw head and table 3/4-horsepower motor (1,725 rpm) Wheel kit for convenient movement around the shop Two-year limited warranty

Features

Designed for high production cut-off work, the Jet 414454 J-3410 wet horizontal metalworking band saw offers four cutting speeds and a hydraulic feed control that allows the efficient cutting of virtually any material. It comes equipped with a coolant system that can greatly extend blade life and speed the cutting of a variety of materials that are best cut with cutting fluids and coolants. The 414454 also features a wheeled base for convenient movement to various work stations around your shop.

A 3/4-horsepower motor powers a steel blade drive with 3/4-inch bi-metal blade, blade wheels made of flanged cast iron, and an oil bath-hardened and ground worm gear. The coolant pump has a 1-gallon capacity and it comes complete with hose, flexible nozzle, shut-off valve, tank, and baffle. For blade guides, it offers an eccentric shaft with sealed ball bearings on the side and sealed ball bearings in the rear. The 414454 also features an adjustable hydraulic feed system.

Specifications Motor: 3/4 horsepower, 1 phase, 115 volt, 1,725 rpm Round at 90 degrees: 7 inches Round at 45 degrees: 4-1/2 inches Rectangle at 90 degrees: 2 inches by 12 inches; 7 inches by 10-1/2 inches Rectangle at 45 degrees: 7 inches by 3-1/2 inches Square at 90 degrees: 7 inches Blade size: 3/4-inch by .35-inch; 93-inch length Blade speeds: 80, 130, 180, and 265 sfpm Blade wheel: 11-7/16-inch diameter Dimensions: 18 inches by 51 inches by 43 inches (WxLxH) Weight: 380 pounds Warranty: 2 years, limited

The JET J-3410 Horizontal Wet Band Saw features side blade guides eccentric shaft and rear blade ball bearings, steel blade drive and heat-treated worm driving a bronze worm gear in oil bath. Heavy-duty cast iron saw head and table. HP: 3/4, Volts: 115, Speed (RPM): 88 - 132 - 178 - 260, Variable Speed: No, Cutting Capacity - Flat Stock (in. x in.): 6 x 7, Cutting Depth at 45deg (in.): 7 x 10, Cutting Depth at 90deg (in.): 6 x 7, Cutting Angles: 6 x 7, Blade Type: Steel, Blade Size L x W x Thickness (in.): 3/4 x 93 x .035, Blade Included: Yes, Stand Included: Yes, Dimensions L x W x H (in.): 50 x 18 x 41