Craftsman 1/3 hp 3.5 amp 10 in Band Saw

Craftsman 1/3 hp 3.5 amp 10 in Band Saw Review

Craftsman 1/3 hp 3.5 amp 10 in Band Saw Feature

• 1/3 HP 3.5 Amp continuous duty motor
• 4-5/8" maximum depth of cut at 90° and 9-5/8" throat depth
• 12-1/2" x 13-3/4" durable cast iron table tilts from 0° to 45° for bevel cutting
• Some Assembly required

Craftsman 10" Band Saw cuts hardwoods, softwoods easily. This band saw is durable and efficient

MK Morse ZCLB14 14TPI Woodworking Stationary Bandsaw Blade, 93-1/2-Inch by 1/4-Inch

MK Morse ZCLB14 14TPI Woodworking Stationary Bandsaw Blade, 93-1/2-Inch by 1/4-Inch Review

MK Morse ZCLB14 14TPI Woodworking Stationary Bandsaw Blade, 93-1/2-Inch by 1/4-Inch Feature

• Provide reliable cutting action on woods and metals
• Guaranteed welds
• Packaging 1 per card

Designed for use on stationary band saws, these carbon hard edge flexible back blades provide reliable cutting action on wood and metals with guaranteed welds.

Timber Wolf Bandsaw Blade 1/4" x 105", 6 TPI

Timber Wolf Bandsaw Blade 1/4" x 105", 6 TPI Review

Timber Wolf Bandsaw Blade 1/4" x 105", 6 TPI Feature

• High silicon, low carbide steel
• Ideal for resawing thick stock
• Runs cooler and lasts longer
• Runs under low tension which requires less horsepower
• Thin kerf

Timber Wolf makes the worlds only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a unique set pattern, create a blade that is everything a wood-cutting blade was meant to be. Blade has over 60 of the speed capabilities of a hook blade while giving you the great finish of a skip. The round design of the gullet eliminates any work hardening zones. Couple that with the special 6.5 degrees rake, 5-tooth set pattern, and .025" thick thin-kerf blade and you have an awesome bandsaw blade!

Rikon 13-920 Miter Gauge for Rikon 10-305 10-Inch Bandsaw

Rikon 13-920 Miter Gauge for Rikon 10-305 10-Inch Bandsaw Review

Rikon 13-920 Miter Gauge for Rikon 10-305 10-Inch Bandsaw Feature

• Sturdy aluminum design with easy to read adjustments.
• Includes T-square slot bar

Fits Rikon 10" Bandsaw

JET J-3410 7-Inch by 12-Inch 3/4-Horsepower 115-Volt Single Phase Horizontal Wet Bandsaw

JET J-3410 7-Inch by 12-Inch 3/4-Horsepower 115-Volt Single Phase Horizontal Wet Bandsaw Review

JET J-3410 7-Inch by 12-Inch 3/4-Horsepower 115-Volt Single Phase Horizontal Wet Bandsaw Feature

• Side blade guides eccentric shaft, ball bearing
• Rear blade guides ball bearings
• Blade drive is steel, heat treated worm, driving a bronze worm gear in oil bath
• Heavy-duty cast iron saw head and table
• Adjustable ball bearing blade guides

The Jet J-3410 7-inch by 12-inch horizontal wet band saw is fully equipped with a 3/4-horsepower motor, side and rear blade guides, heavy-duty cast-iron saw head and table, and rapid acting vise. The included 3/4-inch bi-metal blade comes to a stop after each cut with the automatic shut-off feature, and it's backed by a two-year limited warranty.

Wheeled base for easy portability around your shop (view larger).

414454 J-3410 Wet Band Saw At a Glance: Heat-treated steel worm pinion driving a bronze worm ring gear in an oil bath Heavy-duty cast iron saw head and table 3/4-horsepower motor (1,725 rpm) Wheel kit for convenient movement around the shop Two-year limited warranty

Features

Designed for high production cut-off work, the Jet 414454 J-3410 wet horizontal metalworking band saw offers four cutting speeds and a hydraulic feed control that allows the efficient cutting of virtually any material. It comes equipped with a coolant system that can greatly extend blade life and speed the cutting of a variety of materials that are best cut with cutting fluids and coolants. The 414454 also features a wheeled base for convenient movement to various work stations around your shop.

A 3/4-horsepower motor powers a steel blade drive with 3/4-inch bi-metal blade, blade wheels made of flanged cast iron, and an oil bath-hardened and ground worm gear. The coolant pump has a 1-gallon capacity and it comes complete with hose, flexible nozzle, shut-off valve, tank, and baffle. For blade guides, it offers an eccentric shaft with sealed ball bearings on the side and sealed ball bearings in the rear. The 414454 also features an adjustable hydraulic feed system.

Specifications Motor: 3/4 horsepower, 1 phase, 115 volt, 1,725 rpm Round at 90 degrees: 7 inches Round at 45 degrees: 4-1/2 inches Rectangle at 90 degrees: 2 inches by 12 inches; 7 inches by 10-1/2 inches Rectangle at 45 degrees: 7 inches by 3-1/2 inches Square at 90 degrees: 7 inches Blade size: 3/4-inch by .35-inch; 93-inch length Blade speeds: 80, 130, 180, and 265 sfpm Blade wheel: 11-7/16-inch diameter Dimensions: 18 inches by 51 inches by 43 inches (WxLxH) Weight: 380 pounds Warranty: 2 years, limited

The JET J-3410 Horizontal Wet Band Saw features side blade guides eccentric shaft and rear blade ball bearings, steel blade drive and heat-treated worm driving a bronze worm gear in oil bath. Heavy-duty cast iron saw head and table. HP: 3/4, Volts: 115, Speed (RPM): 88 - 132 - 178 - 260, Variable Speed: No, Cutting Capacity - Flat Stock (in. x in.): 6 x 7, Cutting Depth at 45deg (in.): 7 x 10, Cutting Depth at 90deg (in.): 6 x 7, Cutting Angles: 6 x 7, Blade Type: Steel, Blade Size L x W x Thickness (in.): 3/4 x 93 x .035, Blade Included: Yes, Stand Included: Yes, Dimensions L x W x H (in.): 50 x 18 x 41

Inland DB100 Bandsaw Glass

Inland DB100 Bandsaw Glass Review

Product Information: Glass, wood and metal saw. Its powerful 30 oz.-in. torque motor has speed control to obtain optimum cutting results. Cuts wet with stainless steel Diamond Blade (included) on glass, ceramics, plastic, stone, etc. With optional metal/wood blade, it saws dry on metal & wood. Comes with 2 blades. Features : Permanent magnet motor with speed control. Built-in coolant reservoir. One-piece wheel holder and tilt adjuster tracks the blade perfectly. 9" x 10" non-scratch metal work table. Replaceable BladeSert blade guides. Uses standard 37.7" blades. Specifications : ? Size: 18" x 10" x 12" - 4-7/8" throat ? Power: 1/11 HP, 2700 RPM ? Warranty: 2 years

Bandsaw Blade 70-1/2" x 1/4" x 4T Skip

Bandsaw Blade 70-1/2" x 1/4" x 4T Skip Review

Bandsaw Blade 70-1/2" x 1/4" x 4T Skip Feature

• 70-1/2" long, 1/4" wide 4 TPI skip tooth
• Heavy-duty, durable, commercial grade
• Finer tooth pitches for smoother cuts
• Cuts hard/soft wood
• For all vertical/stationary two-wheel bandsaws

Olson Flex Back Bandsaw Blades are a cut above regular flex back carbon blades! Special heat treatment produces a blade with an extremely hard cutting edge and a spring-tempered back for increased tensile strength. This permits greater tension, improved blade rigidity, and straighter, more accurate cuts. All Olson Flex Back blades are made with alternate bevel teeth and one raker tooth. Raker set: left, right, straight (raker) pattern.

Powermatic 1791216K Model PWBS-14CS Deluxe 14-Inch 1-3/4-Inch Woodworking Bandsaw with Bearing Guides, Lamp, and Chip Blower, 115/230-Volt 1 Phase

Powermatic 1791216K Model PWBS-14CS Deluxe 14-Inch 1-3/4-Inch Woodworking Bandsaw with Bearing Guides, Lamp, and Chip Blower, 115/230-Volt 1 Phase Review

Powermatic 1791216K Model PWBS-14CS Deluxe 14-Inch 1-3/4-Inch Woodworking Bandsaw with Bearing Guides, Lamp, and Chip Blower, 115/230-Volt 1 Phase Feature

• 14-inch band saw; built-in air pump clears chips; fully enclosed motor for longevity
• 1-1/2-horsepower motor; table tips 45-degrees right and 10-degrees left
• Solid steel and cast-iron construction for durability; built-in halogen lamp
• Includes saw, motor, blade, foot brake, work light, rip fence, mitre-gauge, chip blower
• 15-inch by 15-inch table; 44-inch table height; 20 by 34 by 68 total dimensions; 203-pounds; 1-year warranty

With an extra large, two-piece cast-iron table and balanced nine-spoke cast-iron wheel, the Powermatic PWBS-14CS 14-Inch Woodworking Band Saw is a capable, user-friendly machine ideal for professional woodworkers and hobbyists. Its rugged design offers uncompromising accuracy and durability; while a host of innovative features let users tackle a range of heavy-duty jobs with precision and control.

The PWBS-14CS 14-Inch Woodworking Band Saw At a Glance: Features Carter quick-tension lever for speedy blade changes Easy to read tensioning gauge settings indicated in blade width increments Precision balanced, nine-spoke cast-iron wheels reduce vibration 60-watt adjustable lamp built into the body (bulb not included) Rigid, one-piece welded stand that requires no assembly.

The rugged cast-iron table effectively handles both large and small projects. View larger.

The table easily tilts to help you get the right angle for the job. View larger.

Solid, Sturdy Backbone for Vibration-Free Operation
A huge iron casting provides a solid foundation that keeps the PWBS-14CS rigid and vibration free.The heavy-gauge, steel base cabinet adds to the unit's overall stability and provides a solid,vibration-absorbing base for the motor. Because dust collection does not pass through the base cabinet,its interior remains virtually dust free, reducing routine maintenance while enhancing the long life of the motor and drive belt.

To help improve visibility and the air quality of your shop, the PWBS-14CS features a four-inch diameterport cast into the lower housing, directly below the blade, for effective dust evacuation. And tokeep the cut line clearly visible, an integral air pump supplies pressurized air to an adjustable nozzleattached to the upper blade guide, resulting in a chip blower that provides a clear line.

Extra-Large Work Table
To effectively handle projects both big and small, the PWBS-14CS features an extra-large,two piece cast iron table with a tilting section measuring 15.0 x 15.0 inches and a fixedextension measuring 15.0 x 5.0 inches for a total working surface area of 15.0 x 20.0 inches.

Optimum Power and Drive
The PWBS-14CS is powered by a one and one-half-horsepower TEFC (totally enclosed fan cooled)industrial-style motor that comes wired for 115-volt operation, but can be converted to 230 volts.The motor power is delivered through a set of precision-machined multi-groove pulleys that aredriven by a poly-V drive belt system, known for its smooth, efficient transmission of power withvery little temperature buildup.

For their part, the cast-iron drive wheels are fully machined,painted, and fitted with high quality tires and then dynamically balanced to ensure smooth operation.

Easy Adjustments
With the PWBS-14CS, adjustments are never a problem, due to the blade width markings on thetensioning block for blade widths from one-eighth- to three-quarter-inch. The infiniteadjusting system also lets users dial in the correct tension for specialty blades that mayrequire non-standard tension settings.

This model comes with the legendary, Carter quick-release handle assembly that features three positions:full tension, relaxed tension, and full release. Users can move the Carter between all three positionswithout losing the tension setting, potentially lengthening the life of the blade.

User-Friendly Features
The PWBS-14CS also includes an exclusive design, quick-release, precision T-square-style rip fence withfour-inch re-saw attachment; 60-watt adjustable lamp (bulb not included) built into the body to providedirect light on blade and work piece while cutting; and a full six-inch under-guide capacity with 13-1/2-inch width capacity.

Dimensions and Warranty Information
The PWBS-14CS measures 34.0 x 68.0 x 20.0 inches (W x H x D), weighs 250 pounds, and is backed by a five-year warranty.

What's in the Box
One PWBS-14CS saw body; one poly-V drive belt; one trunnion support; one main table; one extension table; two table lock knobs; one table pin; one work light; one blade hook; two fence hooks; two miter gauge hooks; one bag of fasteners; one rip fence and rail assembly; one blade tension handle; one stand with motor; one miter gauge; one pulley cover; one fence body; manual; and warranty card.

60 watt halogen lamp built into the body, providing direct light on blade and workpiece while cutting. Chip blower ensures a clean, visible cut line. Extra-large, two-piece cast iron table consists of a 15 x 15 tilting. (45 degrees right, 10 degrees left) section and a fixed 15 x 5 extension for a total working surface area of 15x20. Balanced, nine-spoke cast iron wheels run smoothly. Easy-to-read tensioning gauge settings indicated in blade width increments. CARTER quick tension release lever speeds blade changes. Features durable micro-adjustable dual bearing blade guide system above and below the table. Full 6 under-guide capacity with 13-1/2 frame-to-blade clearance. Built in 4 dust port. Poly V-belt maximizes power transmission while minimizing noise and vibration. Frame mounted push-button switch. Rigid one-piece welded stand requires no assembly. Includes: 1791216K 14-inch band saw, adjustable rnitre gauge, rip fence with resaw assembly, 1/4-inch band saw blade, and gooseneck work light and chip blower, and stand.

Milwaukee 2629-22 M18 18-Volt Cordless Band Saw Kit

Milwaukee 2629-22 M18 18-Volt Cordless Band Saw Kit Review

Milwaukee 2629-22 M18 18-Volt Cordless Band Saw Kit Feature

• 45% Lighter than Deep Cut ? 10.25 Lbs compact light weight design for cutting overhead and in tight places.
• 3-1/4? Cut Capacity ? cuts most common materials for Electrician, Plumber and Mechanical cutting applications. Single pass cut on 3? copper, 3? angle iron, 2-1/2? conduit.
• Tool-Free Adjustable Material Shoe ? quickly adjusts the shoe and allows flush cuts when working with installed materials against walls and ceilings.
• LED Work Light ? illuminates the cut line in dark areas. Blade Ejection System-Quickly change the blade by moving the material guide into the up position and depressing the blade ejection button.
• Drop Resistant Pulley Guard-Engineered geometries & high impact polymer. Cast Aluminum Gear Case-Withstands jobsite abuse & maintains gear positioning.

The Milwaukee M18 Band Saw is the perfect tool for cutting metal in-place, overhead or in tight spaces. With 3 1/4in. cut capacity and low vibration, this saw delivers the cleanest cuts on the most common materials including strut, 2 1/2in. conduit, 3in. angle iron, 3in. copper and threaded rod without ruining the threads. Cordless: Yes, Speed (RPM): 480, Variable Speed: Yes, Cutting Capacity (SFPM): 480, Blade Included: Yes, Battery Included: Yes, Charger Included: Yes, Case Included: Yes

Grizzly G0636X 17" Ultimate Bandsaw

Grizzly G0636X 17" Ultimate Bandsaw Review

Grizzly G0636X 17" Ultimate Bandsaw Feature

• Blade tension indicator, quick change blade release/tensioning with blade tracking window
• Deluxe cast iron fence with extruded aluminum re-saw fence with precision-ground cast iron table
• Fence adjusts for blade lead, includes scale, magnifying window, and 1" blade
• Micro adjusting rack & pinion table tilt and height scale measurement
• Miter gauge, foot brake stop, rack and pinion upper guide adjustment, and 4" dust port x 2

We wanted a saw that would compete directly against the high dollar, "high-end" European bandsaws. After several years of research and development, we have come up with the ULTIMATE 17" Bandsaw that is loaded with some amazing features. It is our opinion that this saw is actually better than any bandsaw on the market in its size range.

DEWALT DWM120K 10 Amp 5-Inch Deep Cut Portable Band Saw Kit

DEWALT DWM120K 10 Amp 5-Inch Deep Cut Portable Band Saw Kit Review

DEWALT DWM120K 10 Amp 5-Inch Deep Cut Portable Band Saw Kit Feature

• Industry best 10 amp motor designed with controlled power to withstand any jobsite application
• Industry best 5-inch deep cut capacity for round or rectangular stock
• Serviceable steel shroud and rubber bumpers allow guards to withstand jobsite abuse without damage
• LED sight light allows the user to see cut line in dark jobsite environment
• Integrated hang hook allows user to hang the saw without damaging front handle or castings Variable speed dial allows user to vary speed for specific materials and various applications (100-350 spm)

Durable and versatile, the DEWALT Deep-Cut Portable Band Saw Kit features a powerful 10 amp motor with variable speed control for material-specific and application-specific cutting performance. Also offering an LED sight that indicates the cut line, ergonomic grip options, and an integrated hanging hook, this work-horse saw is packed with little details that make your life easier.

Deep-Cut Portable Band Saw Kit At a Glance: Powerful 10 amp motor handles tough applications Variable speed control from 100 to 350 sfm for versatility 5-inch deep-cut round-stock capacity; 5 by 4-3/4-inch rectangular-stock capacity LED sight light makes cut line easy to see Ergonomic handle design for improved control Includes hex wrench, standard blade, and kit box Three-year limited warranty, one-year free service, 90-day money back guarantee

This kit features a portable band saw with a 10 amp motor and a sturdy kit box for safe keeping. View larger.

Make 5-inch cuts on round stock and 4-3/4-inch cuts on rectangular stock. View larger.

Powerful Motor with Variable Speed Control
Thanks to a 10 amp motor designed to withstand tough jobs, this portable band saw to make quick cuts without getting bogged down. It can perform at speeds ranging from 100 sfm to 350 sfm, and its variable-speed dial allows you to quickly and easily select the perfect speed for each application.

This versatile deep-cut DEWALT saw offers a 5-inch capacity when working with round stock and 5 by 4-3/4-inch capacity when working with rectangular stock.

LED sight indicates cut line

Designed for Durability and Convenience
A durable and adjustable material guide allows you to set the saw for optimal performance when working with a variety of materials, while a convenient LED sight light allows you to see the cutting area clearly, even in poorly lit environments.

Other features that contribute to this saw's long life include an integrated hang hook that allows you to hang the saw without having to put it up and down. A serviceable steel shroud, and rubber bumpers that allow the saw's guards to withstand jobsite abuse.

Increased Blade Life and Easy Maintenance
This band saw's accurate blade tracking adjustment improves blade alignment and reduces wear, resulting in increased blade life, while dual bearing blade guide rollers increase durability in the blade support system for overall dependability. When it does come time to switch out your blade, the saw's blade changing lever loosens blade tension to make blade changes more convenient.

In addition, this saw features externally replaceable brushes, which allow you to make quick repairs whenever and wherever you need to.

Multi-position front handle

Ergonomic Features for Comfort and Accuracy
A comfortable grip is an integral part of any saw's performance. This band saw features an oversized, multi-position front handle that offers plenty of hand space and easy adjustability, so you can get a precise grip and achieve more accurate cuts. An ergonomic soft grip back handle and the saw's well balanced body also contribute to improved comfort and reduced user fatigue.

This Deep-Cut Portable Band Saw comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money back guarantee.

What's in the Box
DWM120K DEWALT Deep-Cut Portable Band Saw, hex wrench, standard 44.875- by .500- by .020-inch blade, and kit box.

This band saw is ideal for cutting a wide variety of materials, from rebar to metal framing stock.

Integrated hang hook; Variable speed dial; Superior balance and ergonomics; Blade tracking adjustment; Dual bearing blade guide rollers; Durable and adjustable material guide; Ergonomic soft grip back handle; Blade changing lever; Externally replaceable brushes; 10 Amps; 100-350 Ft per minute; 5” Max capacity (Round); 5” x 4 3/4” Max Capacity (Rectangular); Front handle style multi position bale; LED light; Rubber bumpers w/ serviceable shroud; Tool length 21”; Tool Weight 15.0 lbs; Includes: Hex wrench, standard 44-7/8”x1/2”x.020” blade, and kit box