SuperCut B56.125W38R14 Three Wheeler Bandsaw Blades, 56-1/8" Long - 3/8" Width; 10 Raker Tooth

SuperCut B56.125W38R14 Three Wheeler Bandsaw Blades, 56-1/8" Long - 3/8" Width; 10 Raker Tooth Review

SuperCut B56.125W38R14 Three Wheeler Bandsaw Blades, 56-1/8" Long - 3/8" Width; 10 Raker Tooth Feature

• For 2 and 3 Wheel Tabletop Band Saws; 3/8" Width; 10 Raker Tooth; 0.014" Kerf

The Three Wheeler blade is made of special Carbon Tool Steel with precision heat-treated teeth that is thinner (.014") in order to enable it to withstand sharp flexing and high speeds. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 56-1/8 inch ( 4 ft. 8-1/8 inch, 4' 8-1/8" ) bandsaw blades suit the following models: Pro-Tech? 3104; Delta? 28-160, 28-165, 28-180, 28-185; Jet? DBS-10; Nu-Way? 10"; Nu-Mark? 10"; Northern Industrial? 10"; Grizzly? G5965 7-1/2". (all above are tabletop 3-wheelers) If in doubt, to determine bandsaw blade length: 1 - Check the owner's manual of your bandsaw machine for specifications - not only the length, but also the range of the width and thickness.2 - If the owner's manual is not available, refer to previous invoices.3 - Cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This method will provide the most possible accurate length.4 - Upon requested, Magnate makes blades of any length and types to fit your brand and model.