Craftsman 1/3 hp 3.5 amp 10 in Band Saw

Craftsman 1/3 hp 3.5 amp 10 in Band Saw Review

Craftsman 1/3 hp 3.5 amp 10 in Band Saw Feature

• 1/3 HP 3.5 Amp continuous duty motor
• 4-5/8" maximum depth of cut at 90° and 9-5/8" throat depth
• 12-1/2" x 13-3/4" durable cast iron table tilts from 0° to 45° for bevel cutting
• Some Assembly required

Craftsman 10" Band Saw cuts hardwoods, softwoods easily. This band saw is durable and efficient

MK Morse ZCLB14 14TPI Woodworking Stationary Bandsaw Blade, 93-1/2-Inch by 1/4-Inch

MK Morse ZCLB14 14TPI Woodworking Stationary Bandsaw Blade, 93-1/2-Inch by 1/4-Inch Review

MK Morse ZCLB14 14TPI Woodworking Stationary Bandsaw Blade, 93-1/2-Inch by 1/4-Inch Feature

• Provide reliable cutting action on woods and metals
• Guaranteed welds
• Packaging 1 per card

Designed for use on stationary band saws, these carbon hard edge flexible back blades provide reliable cutting action on wood and metals with guaranteed welds.

Timber Wolf Bandsaw Blade 1/4" x 105", 6 TPI

Timber Wolf Bandsaw Blade 1/4" x 105", 6 TPI Review

Timber Wolf Bandsaw Blade 1/4" x 105", 6 TPI Feature

• High silicon, low carbide steel
• Ideal for resawing thick stock
• Runs cooler and lasts longer
• Runs under low tension which requires less horsepower
• Thin kerf

Timber Wolf makes the worlds only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a unique set pattern, create a blade that is everything a wood-cutting blade was meant to be. Blade has over 60 of the speed capabilities of a hook blade while giving you the great finish of a skip. The round design of the gullet eliminates any work hardening zones. Couple that with the special 6.5 degrees rake, 5-tooth set pattern, and .025" thick thin-kerf blade and you have an awesome bandsaw blade!

Rikon 13-920 Miter Gauge for Rikon 10-305 10-Inch Bandsaw

Rikon 13-920 Miter Gauge for Rikon 10-305 10-Inch Bandsaw Review

Rikon 13-920 Miter Gauge for Rikon 10-305 10-Inch Bandsaw Feature

• Sturdy aluminum design with easy to read adjustments.
• Includes T-square slot bar

Fits Rikon 10" Bandsaw

JET J-3410 7-Inch by 12-Inch 3/4-Horsepower 115-Volt Single Phase Horizontal Wet Bandsaw

JET J-3410 7-Inch by 12-Inch 3/4-Horsepower 115-Volt Single Phase Horizontal Wet Bandsaw Review

JET J-3410 7-Inch by 12-Inch 3/4-Horsepower 115-Volt Single Phase Horizontal Wet Bandsaw Feature

• Side blade guides eccentric shaft, ball bearing
• Rear blade guides ball bearings
• Blade drive is steel, heat treated worm, driving a bronze worm gear in oil bath
• Heavy-duty cast iron saw head and table
• Adjustable ball bearing blade guides

The Jet J-3410 7-inch by 12-inch horizontal wet band saw is fully equipped with a 3/4-horsepower motor, side and rear blade guides, heavy-duty cast-iron saw head and table, and rapid acting vise. The included 3/4-inch bi-metal blade comes to a stop after each cut with the automatic shut-off feature, and it's backed by a two-year limited warranty.

Wheeled base for easy portability around your shop (view larger).

414454 J-3410 Wet Band Saw At a Glance: Heat-treated steel worm pinion driving a bronze worm ring gear in an oil bath Heavy-duty cast iron saw head and table 3/4-horsepower motor (1,725 rpm) Wheel kit for convenient movement around the shop Two-year limited warranty

Features

Designed for high production cut-off work, the Jet 414454 J-3410 wet horizontal metalworking band saw offers four cutting speeds and a hydraulic feed control that allows the efficient cutting of virtually any material. It comes equipped with a coolant system that can greatly extend blade life and speed the cutting of a variety of materials that are best cut with cutting fluids and coolants. The 414454 also features a wheeled base for convenient movement to various work stations around your shop.

A 3/4-horsepower motor powers a steel blade drive with 3/4-inch bi-metal blade, blade wheels made of flanged cast iron, and an oil bath-hardened and ground worm gear. The coolant pump has a 1-gallon capacity and it comes complete with hose, flexible nozzle, shut-off valve, tank, and baffle. For blade guides, it offers an eccentric shaft with sealed ball bearings on the side and sealed ball bearings in the rear. The 414454 also features an adjustable hydraulic feed system.

Specifications Motor: 3/4 horsepower, 1 phase, 115 volt, 1,725 rpm Round at 90 degrees: 7 inches Round at 45 degrees: 4-1/2 inches Rectangle at 90 degrees: 2 inches by 12 inches; 7 inches by 10-1/2 inches Rectangle at 45 degrees: 7 inches by 3-1/2 inches Square at 90 degrees: 7 inches Blade size: 3/4-inch by .35-inch; 93-inch length Blade speeds: 80, 130, 180, and 265 sfpm Blade wheel: 11-7/16-inch diameter Dimensions: 18 inches by 51 inches by 43 inches (WxLxH) Weight: 380 pounds Warranty: 2 years, limited

The JET J-3410 Horizontal Wet Band Saw features side blade guides eccentric shaft and rear blade ball bearings, steel blade drive and heat-treated worm driving a bronze worm gear in oil bath. Heavy-duty cast iron saw head and table. HP: 3/4, Volts: 115, Speed (RPM): 88 - 132 - 178 - 260, Variable Speed: No, Cutting Capacity - Flat Stock (in. x in.): 6 x 7, Cutting Depth at 45deg (in.): 7 x 10, Cutting Depth at 90deg (in.): 6 x 7, Cutting Angles: 6 x 7, Blade Type: Steel, Blade Size L x W x Thickness (in.): 3/4 x 93 x .035, Blade Included: Yes, Stand Included: Yes, Dimensions L x W x H (in.): 50 x 18 x 41

Inland DB100 Bandsaw Glass

Inland DB100 Bandsaw Glass Review

Product Information: Glass, wood and metal saw. Its powerful 30 oz.-in. torque motor has speed control to obtain optimum cutting results. Cuts wet with stainless steel Diamond Blade (included) on glass, ceramics, plastic, stone, etc. With optional metal/wood blade, it saws dry on metal & wood. Comes with 2 blades. Features : Permanent magnet motor with speed control. Built-in coolant reservoir. One-piece wheel holder and tilt adjuster tracks the blade perfectly. 9" x 10" non-scratch metal work table. Replaceable BladeSert blade guides. Uses standard 37.7" blades. Specifications : ? Size: 18" x 10" x 12" - 4-7/8" throat ? Power: 1/11 HP, 2700 RPM ? Warranty: 2 years

Bandsaw Blade 70-1/2" x 1/4" x 4T Skip

Bandsaw Blade 70-1/2" x 1/4" x 4T Skip Review

Bandsaw Blade 70-1/2" x 1/4" x 4T Skip Feature

• 70-1/2" long, 1/4" wide 4 TPI skip tooth
• Heavy-duty, durable, commercial grade
• Finer tooth pitches for smoother cuts
• Cuts hard/soft wood
• For all vertical/stationary two-wheel bandsaws

Olson Flex Back Bandsaw Blades are a cut above regular flex back carbon blades! Special heat treatment produces a blade with an extremely hard cutting edge and a spring-tempered back for increased tensile strength. This permits greater tension, improved blade rigidity, and straighter, more accurate cuts. All Olson Flex Back blades are made with alternate bevel teeth and one raker tooth. Raker set: left, right, straight (raker) pattern.