Craftsman 1/3 hp 3.5 amp 10 in Band Saw

Craftsman 1/3 hp 3.5 amp 10 in Band Saw Review

Craftsman 1/3 hp 3.5 amp 10 in Band Saw Feature

• 1/3 HP 3.5 Amp continuous duty motor
• 4-5/8" maximum depth of cut at 90° and 9-5/8" throat depth
• 12-1/2" x 13-3/4" durable cast iron table tilts from 0° to 45° for bevel cutting
• Some Assembly required

Craftsman 10" Band Saw cuts hardwoods, softwoods easily. This band saw is durable and efficient

MK Morse ZCLB14 14TPI Woodworking Stationary Bandsaw Blade, 93-1/2-Inch by 1/4-Inch

MK Morse ZCLB14 14TPI Woodworking Stationary Bandsaw Blade, 93-1/2-Inch by 1/4-Inch Review

MK Morse ZCLB14 14TPI Woodworking Stationary Bandsaw Blade, 93-1/2-Inch by 1/4-Inch Feature

• Provide reliable cutting action on woods and metals
• Guaranteed welds
• Packaging 1 per card

Designed for use on stationary band saws, these carbon hard edge flexible back blades provide reliable cutting action on wood and metals with guaranteed welds.

Timber Wolf Bandsaw Blade 1/4" x 105", 6 TPI

Timber Wolf Bandsaw Blade 1/4" x 105", 6 TPI Review

Timber Wolf Bandsaw Blade 1/4" x 105", 6 TPI Feature

• High silicon, low carbide steel
• Ideal for resawing thick stock
• Runs cooler and lasts longer
• Runs under low tension which requires less horsepower
• Thin kerf

Timber Wolf makes the worlds only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a unique set pattern, create a blade that is everything a wood-cutting blade was meant to be. Blade has over 60 of the speed capabilities of a hook blade while giving you the great finish of a skip. The round design of the gullet eliminates any work hardening zones. Couple that with the special 6.5 degrees rake, 5-tooth set pattern, and .025" thick thin-kerf blade and you have an awesome bandsaw blade!